Skip to main content
High Speed External Input Box
Integrate analog signals with Tekscan systems via high speed USB.
Not available for online purchase.
Contact us for pricing
Description
Integrate analog signals with Tekscan systems via USB-6210.
- Analog Input (up to 20,000 Hz)
- Calibration with load cell (up to 20,000 Hz)
- Synchronize data collection between analog and tactile sensor in high speed applications (ideal for impact studies)
Analog Sensor Input
All Tekscan systems can record up to eight analog sensors in addition to acquiring pressure data from the Tekscan sensor. In-depth analysis can be run while correlating Tekscan data with data from:
- Thermocouple
- Humidity sensor
- Load cell
- Etc.
High Speed Data without Synchronization
|
High Speed Data with Synchronization
|
Specifications
| High Speed External Input Box | |
|---|---|
| Model # | USB-6210 |
General |
|
| USB Power |
Bus-Powered |
| Measurement Type | Voltage |
| Isolation Type | None |
Input/Output |
|
| Analog Channels | 8 |
| Resolution | 16-bits |
| Sample Rate |
Same as Tekscan Sensor (not synch, 20 kHz max) |
| Max Voltage | 10V |
| Voltage Input Range | -10V to 10V |
| Synchronize Port Input | 1 |
Physical Specifications |
|
| Length | 16.9 cm (6.65 in.) |
| Width | 9.4 cm (3.70 in.) |
| Height | 3.1 cm (1.20 in.) |
| I/O Connector | Screw Terminals |
| Cable compatibility | 16 to 28 AWG |
| Weight | 206 g (7.02 oz) |
| Operating Temperature | 0° to 45°C (32° to 113°F) |
| Storage Temperature | -20° to 70°C (-4° to 158°F) |
| Humidity | 10 to 90% RH, non-condensing |
System Requirements |
|
| Software | I-Scan™ V7.6 or newer |
|
Operating System |
Please see Tekscan's Computer Requirements |
| Software |
Analog Input: No additional software needed |
Systems
The versatile I-Scan tactile pressure mapping system is tailor-made by choosing from over 200...