Installing MS SQL Server for T-Scan v10

Server Installation

T-Scan v10 uses Microsoft's SQL Server as its database engine. You must install SQL where you plan to locate your T-Scan database before upgrading T-Scan software on your operatory workstations. This is a one-time only step–once SQL is installed, future T-Scan updates will return to a single step process!

Please click on one of the icons below that best describes your setup. Instructions will appear below.

Local Configuration

v10 local config icon

Network Configuration

v10 network configuration icon

Local Configuration

If you plan to run T-Scan in a local configuration where your patient list is only accessible to one operatory workstation or a traveling laptop, you will be installing SQL to that workstation.

Instructions

  1. Your T-Scan software was emailed. Click on the downlink.
  2. Your downloaded software is compressed, so extract the software.
  3. Open the installation files and locate Autoplay.exe
  4. Right-click over that file and select "Run as administrator"
  5. Make note of the server path that gets displayed during the SQL set-up similar to the example shown below. This will be needed when you upgrade your T-Scan application on your operatory workstations

  7. Return to T-Scan on your operatory workstation and select " Help > Update" to update your T-Scan application. Follow the instructions located here to continue.

 

Network Configuration

If you have a Networked T-Scan license to centralize your patient database, these instructions are for you. You must have purchased a Network License Add-On to enable this functionality.

All references below to "server" relate to the computer that will be hosting your T-Scan database, not the workstations on which you will be running T-Scan.

Instructions

  1. Your T-Scan software was emailed. Click on the downlink.
  2. Your downloaded software is compressed, so extract the software.
  3. Open the installation files and locate Autoplay.exe
  4. Right-click over that file and select "Run as administrator"
  5. Make note of the server path that gets displayed during the SQL set-up similar to the example shown below. This will be needed when you upgrade your T-Scan application on your operatory workstations
    .

  6. When complete, you will have successfully downloaded MS SQL. Return to T-Scan on your operatory workstation and select " Help > Update" to update your T-Scan application. Follow the instructions located here to continue.

 

« Back to the FAQ